ECU with Ready Built Harness Package
Select the package and choose from the input/output options
Step 1
ECU Package
Click below to learn more and purchase your Omex package
Step 2
Connected Engine Parts
Click below to purchase Omex parts or use your own (check instruction manuals or contact us for compatibility)
INJECTORS
The ECU controls 4 injectors semi-sequentially. Injectors should be high impedance as found on almost all modern engines. Available wiring harness connectors are shown on the ECU and wiring package product page.
IGNITION COIL
The ECU can control either ‘single coil with distributor’ or 4cyl distributorless (DIS wasted spark) ignition. Click below to learn more and purchase the Omex ignition coil. Available wiring harness connectors are shown on the ECU and wiring package product page.
THROTTLE POSITION SENSOR
Required on all engines. 0-5v sensor needed as found on almost all modern engines. Available wiring harness connectors are shown on the ECU and wiring package product page.
COOLANT TEMPERATURE SENSOR
Required on all engines. Compatible with most 2 pin OE sensors. Click below to learn more and purchase the Omex sensor. Available wiring harness connectors are shown on the ECU and wiring package product page.
AIR SENSORS
Normally Aspirated, ITBs road or race, or single throttle race
Requires an air temperature sensor. Click below to learn more and purchase Omex sensor.
Normally Aspirated, single throttle road
Requires an air temperature sensor and a 1bar manifold pressure sensor. Click below to learn more and purchase Omex sensors.
Forced Induction
Requires an air temperature sensor and boosted pressure sensor. Click below to learn more and purchase Omex sensors.
Available wiring harness connectors are shown on the ECU and wiring package product page
CRANK POSITION SENSOR
All engines need a crank sensor and trigger pattern for engine speed and position readings
Later engines
(e.g. Zetec, Duratec) may already have a suitable 36-1 or 60-2 crank trigger.
Earlier engines
need crank triggering adding
-
Option 1 Purchase a universal trigger kit from Omex (requires machining to fit).
-
Option 2 Source an engine-specific aftermarket trigger kit.
Available wiring harness connectors are shown on the ECU and wiring package product page.
Click below to learn more and purchase.
LAMBDA SENSOR
Optional
If you need to meet catalyst emission standards, you will nee a lambda sensor. If required, click below to learn more and purchase the Omex sensor. Available wiring harness connectors are shown on the ECU and wiring package product page.
IDLE AIR BYPASS VALVE
Optional - Forced induction or normally aspirated single throttle road engines
The ECU can control 2 / 3 wire solenoid valves or 4 wire stepper motors. Can also be used for turbo anti-lag. Click below to learn more and purchase the wiring to suit your engine. Available wiring harness connectors are shown on the ECU and wiring package product page.
VVT
Optional
2 stage cam control 1 or 2 wire solenoids. Click below to learn more and purchase the wiring to suit your engine.
BOOST CONTROLS
Forced Induction engines only - Optional
The ECU can control 2 wire solenoids. Click below to learn more and purchase the wiring to suit your solenoid.
Step 3
Optional Extras
Click below to learn more and purchase.
