Home

Rev Limiter / Shift Light

ECUs

Inlet systems

Engines


rev limiter and shift light composition image

Consistant, optimal gearshifts. Engine over-rev protection. Faster launches. All racers need these and Omex Technology's range of Rev Limiters and Shift Lights provide the solutions.

right click to download OMRLC instruction manual

A high performance engine rev limiter. The Rev Limiter Clubman offers a switchable soft and hard cut rev limit reducing engine power safely as the user definable limit is approached. Available in both single coil and a twin coil version for use on 4cyl DIS engines.


right click to download OMRLCLC instruction manual

Similar to the Rev Limiter Clubman, but with the addition of an auxiliary rev limit that can be set, then operated with the supplied switch to give consistant starts, reducing the chance of wheelspin or engine 'bog down'.


right clck to download OMSLP instruction manual

A highly accurate shift ligh with a single remotely mounted ultra-bright 3000mcd brightness 10mm bezelled LED. The engine speed at which the LED lights can be set by the user in increments of 100rpm


right click to download OMSLS instruction manual

A shift light with a small (40x16x13mm) remote LED module incorporating four 5mm incrementally lighting LEDs of 350mcd brightness (each). Both the final shift point and the increments between LEDs are user definable to suit the driver's needs.


right click to download OMSYS instruction manual

Combing a high performance soft-cut rev limiter and a single remotely mounted 10mm LED shift light. The Speed System provides a complete solution in one unit.


Dimensions and Weight
Dimensions - 82x40x22mm
Weight (approx) - 125g
Wire Length (approx) - 2m

Rev Range
2Cyl 1,000rpm - 20,000rpm
4Cyl 1,000rpm - 20,000rpm
6cyl 1,000rpm - 12,000rpm
8cyl 1,000rpm - 10,000rpm
Accuracy +/- 10rpm @ 6,000rpm

E-Marking
The Omex product range is European Type Approved and therefore legal for road vehicle use (e11 72/245-95/54-1573-00).


Digital Set
Omex's acclaimed increment and decrement buttons and LEDs allow user set points in 100rpm steps. This does not rely on external information and so removes error due to tacho and reading innaccuracies.

Manufacture
All Omex products are manufactured in an ISO9000 approved factory and are individually tested before sale, ensuring a consistantly high quality product.


FAQs

DOWNLOADS